Correct Nutanix NCP-MCI-5.20 Practice Exam - Valid For Passing NCP-MCI-5.20 Exam Successfully

Correct Nutanix NCP-MCI-5.20 Practice Exam – Valid For Passing NCP-MCI-5.20 Exam Successfully

Regina2022-07-30T01:58:57+00:00

Get the correct Nutanix NCP-MCI-5.20 practice exam to prepare for the Nutanix Certified Professional – Multi cloud Infrastructure (NCP-5.20) certification exam now. We have verified that the NCP-MCI-5.20 practice exam is valid with the real questions and precise answers to pass the Nutanix NCP-5.20 exam successfully. The NCP-MCI-5.20 practice exam questions will permit you to practice also and for the duration of Nutanix Certified Professional – Multi cloud Infrastructure (NCP-5.20) exam preparation, you can effortlessly make contact with and get the most effective accommodations in the ITExamShop. We guarantee that you can pass the Nutanix NCP-MCI-5.20 exam with the correct Nutanix NCP-MCI-5.20 practice exam.

Below Are Nutanix NCP-MCI-5.20 Free Demo Questions For Reading

Page 1 of 4

1. Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)

Avoid adding guest VMs to the CVM and host VLA

Add all VMs to the default VLAN0 on bridge br1.

Add the CVM and the AHV host to the same VLA

Add all VMs to a new VLAN other than VLAN 0.

2. Refer to the exhibit.

The Linux Admin role has been created to manage only Linux VMs in the environment.

However, the Admin1 user does not have access to all Linux VMs.

What step should be taken to grant the proper access?

Add the hosts to the entities KM for the role.

Grant the admin1 user the viewer role (or the cluster.

Add the role to the Linux images.

Add the proper category to each Linux V

3. An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.

Which method should be used to locate these events?

On the Health dashboard, use the Log Collector to export data based on time stamp.

Export the cluster event log to a CSV on the Alerts dashboard.

On the Alerts dashboard, filter based on Impact Type and the desired Time Range.

Configure an Alert Policy to generate an email with the data on the Health dashboard.

4. Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Deploy the Move appliance.

Use Cross-Hypervisor D

Import the .vmdk into the Image Service.

Use shared nothing live migration.

5. A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.

The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.

How should the administrator perform this task?

Create a sperate three-node cluster using the nodes that meet the requirement.

Configure VM-Host affinity for the nodes that meet the application's GPU requirement.

Over-Provision the application VM with additional virtual GPUs.

Configure anti-affinity rules between the application VM and the other VMs running on the cluster.

6. An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

The CD-ROM interface is too slow.

The administrator selected a disk attached before it can boot to a C

The VM needs to have a standard disk attached before it can boot to a C

The bootable CD image is corrupted during creation.

7. When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

API Audit

Flow

DNS

NTP Synchronization

8. An administrator wants to make sure that the health of a cluster is in a good state.

Which command the utility will provide information related to the health of the cluster?

ncc

generic status

top

iostat

9. An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.

Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?

A VM entity chart with each of the relevant metrics.

A cluster metric chart for each of the relevant metrics

A cluster entity chart with each of the relevant metrics

A VM metric chart for each of the relevant metrics

10. Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?

Live Migration

Storage vMotion

Nutanix Move

Cloud Connect

Page 2 of 4

11. Refer to Exhibit.

An administrator increases the cluster RF to 3. The containers are not modified.

What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

Zookeeper = 1 and Extent Groups = 1

Zookeeper = 2 and Extent Groups = 2

Zookeeper = 2 and Extent Groups = 1

Zookeeper = 1 and Extent Groups = 2

12. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analytics Graphs?

Cluster CPU and Memory Only

Cluster IO, Network, Database and App Server CPU

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

13. Where can an administrator change a CVM password?

KMS Server Terminal

CVM setting in Prism Element

CVM setting in Prism Central

Prism CVM VM Console

14. Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)

AOS

BMC

BIOS

Hypervisor

HBA Firmware

15. How will an HDD failure affect VMs with data on the failed device?

The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.

A live migration will be initiated, moving the affected VMs to a host that contains the replica data.

The VMs will remain operational on that host and continue to function normally with no noticeable impact

An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.

16. A customer has a 4-node cluster running at 80% capacity. One node fails due to a motherboard issue.

What is the effect?

The cluster continues to run but in a degraded state.

Zeus becomes available after 60 minutes.

Zeus becomes unavailable for 30 minutes.

The cluster continues to run normally.

17. When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Restart on a best-effort basis if resources are available

Perform a live migration to other hosts in the AHV cluster

Restart on other hosts in the AHV cluster

Perform a live migration on a best-effort basis if resources are available

18. An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.

The application was installed on a VM with the following configuration:

• FOU vCPUs with one core/vCPU

• 4GB of Memory

• One 50GB vDisk for the Windows installation

• One 2TB vDisk for the application

What is the recommended configuration change to improve throughput?

Add 4GB of memory to the VM

Increase the vCPUs assigned to the VM

Span the 2TB disk across four vDisks

Increase the number of cores per vCPU

19. Which data savings technique utilizes stripes and parity calculation in a Nutanix cluster?

Compression

Parity strip

Erasure coding

Deduplication

20. In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?

High Availability

Protection Domain

Host Affinity Rules

Availability Zone

Page 3 of 4

21. A node with Erasure Coding fails.

What is the impact?

The node stops utilizing Erasure Coding.

Potentially increased amount of data stored in the SSD tier.

Increased Controller VM CPU Load.

AQS unable to do deduplication during the Erasure Coding failure.

22. The Linux administration team has requested access rights to any current or future Linux VM in the environment

What entity should be selected when assigning this new role?

Image

AHV Cluster

Category

Project

23. Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?

allssh show_uplinks

manage_ovs show_uplinks

allssh manage_ovs show_uplinks

manage ovs show uplinks

24. Which node type does not deploy a Nutanix Controller VM?

Storage Only

Hyper Converged

Compute Only

All Flash

25. In which two scenarios is Native Key Management Server supported? (Choose two)

XenServer and AHV mixed cluster.

Hyper-V and AHV mixed cluster.

KVM and AHV mixed cluster.

ESXi and AHV mixed cluster.

26. A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

The- cluster becomes unavailable and goes into read-only mode.

All operations and services on the Node B are shut down and go into a waiting state.

The cluster is unaffected and no administrator intervention is required.

Node B sends a leadership request to the Witness VM and goes into single-node mode.

27. Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

Allows proxy server settings to be set up for a defined network

Allows AHV to assign IP addresses automatically to VMs using DHCP

Configures a VLAN with an IP subnet and assigns a group of IP addresses

Configures firewall rules to prevent or allow certain TCP/IP traffic

28. An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons.

The administrator puts the host in maintenance mode.

What should the administrator do to perform an orderly shutdown of the CVM?

Execute the cvm_shutdown -P new command from the CV

Enter Fever off Server - immediate from the IPMI console.

Enter Fewer off Server-orderly Shutdown from the IPMI console.

Execute the cvm_shutdown -P now command from the host.

29. In a Nutanix Cluster, l/Os are served by the host where the VM is running

Which Nutanix feature does this describe?

Data Resiliency

Data Locality

Distributed File System

Distributed Storage Fabric

30. How many Prism Central instances are required to deploy Leap:'

One per availability zone

One per customer environment

One per physical site

One per AHV cluster

Page 4 of 4

31. A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.

What occurs to the cluster and these VMs during an AHV upgrade?

One node hosts two VMs while the node being upgraded is in maintenance mode.

One VM out of the four powers down when the node hosting it reboots.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

The AHV pre-upgrade checks fail until the four VMs are powered off.

32. When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?

2000

2074

8080

9943

33. Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)

ECDSA

ECDH

ED25519

RSA

34. In Files, how many FSVMs are deployed by default?

35. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

Cluster IO, Network, Database and App Server CPU

Cluster CPU and Memory Only

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

Welcome To Choose Required IT Certification Exams Online

Correct Nutanix NCP-MCI-5.20 Practice Exam – Valid For Passing NCP-MCI-5.20 Exam Successfully

Below Are Nutanix NCP-MCI-5.20 Free Demo Questions For Reading

Author

Leave a Reply Cancel reply