Passing Check Point CCTE Certification Exam Can Be Guaranteed With 156-585 Updated Questions

Regina2021-10-07T08:24:18+00:00

By Regina CCTE, Check Point, Free Questions Online 156-585, 156-585 exam questions, 156-585 free questions, 156-585 practice exam 0 Comments

It must be clear that passing Check Point Certified Troubleshooting Expert CCTE certification exam can be guaranteed with ITExamShop 156-585 updated questions. According to the new exam questions and exam details, we have updated Check Point 156-585 practice exam with 75 questions and answers. If you are trying to start a bright profession inside the IT sector or aiming to pass Check Point CCTE certification 156-585 exam then you ought to select the real exam questions with verified answers to prepare and pass 156-585 exam in the first attempt.

Check Point 156-585 Free Demo Questions Are Below to Help You Check The Quality

Page 1 of 2

1. What command is usedtofind out which port Multi-Portal has assigned to the Mobile Access Portal?

mpclient getdata sslvpn

netstat -nap | grep mobile

mpclient getdata mobi

netstat getdata sslvpn

2. What is the simplest and most efficient way to check all dropped packets in real time?

fw ctl zdebug * drop in expert mode

Smartlog

cat /dev/fwTlog in expert mode

tail -f SFWDIR/log/fw log |grep drop in expert mode

3. What table does the command "fwaccel conns" pull information from?

fwxl_conns

SecureXLCon

cphwd_db

sxl_connections

4. What is the kernel process for Content Awareness that collects the data from the contexts received from the CMI and decides if the file is matched by a data type?

dlpda

dlpu

cntmgr

cntawmod

5. Where do Protocol parsers register themselves for IPS?

Passive Streaming Library

Other handlers register to Protocol parser

Protections database

Context Management Infrastructure

6. Which command do you need to execute to insert fw monitor after TCP streaming (out) in the outbound chain using absolute position? Given the chain was 1ffffe0, choose the correct answer.

fw monitor Cpo -0x1ffffe0

fw monitor Cp0 ox1ffffe0

fw monitor Cpo 1ffffe0

fw monitor Cp0 Cox1ffffe0

7. What are the four ways to insert an FW Monitor into the firewallkernel chain?

Relative position using location, relativepositionusing alias, absolute position, all positions

Absolute position using location, absolute position using alias, relative position, all positions

Absolute position using location, relative position using alias, general position, all positions

Relative position using geolocation relative position using inertial navigation, absolute position all positions

8. Rules within the Threat Prevention policy use the Malware database and network objects.

Which directory is used for the Malware database?

$FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/

$CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/

$FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/

$FWDlR/log/install_manager_tmp/ANTIMALWARBlog?

9. Check Point's PostgreSQL is partitioned into several relational database domains.

Which domain contains network objects and security policies?

User Domain

System Domain

Global Domain

Log Domain

10. During firewall kernel debug with fw ctl zdebug you received less information than expected. You noticed that a lot of messages were lost since the time the debug was started.

What should you do to resolve this issue?

Increase debug buffer; Use fw ctl debug Cbuf 32768

Redirect debug output to file; Use fw ctl zdebug Co ./debug.elg

Increase debug buffer; Use fw ctl zdebug Cbuf 32768

Redirect debug output to file; Use fw ctl debug Co ./debug.elg

Page 2 of 2

11. What command sets a specific interface as not accelerated?

noaccel-s<interface1>

fwaccel exempt state <interface1>

nonaccel -s <interface1>

fwaccel -n <intetface1 >

12. Which Threat Prevention daemon is the core Threat Emulator, engine and responsible for emulation files and communications with Threat Cloud?

ctasd

inmsd

ted

scrub

13. The management configuration stored in the Postgres database is partitioned into several relational database Domains, like - System, User, Global and Log Domains. The User Domain stores the network objects and security policies.

Which of the following is stored in the Log Domain?

Configuration data of Log Servers and saved queries for applications

Active Logs received from Security Gateways and Management Servers

Active and past logs received from Gateways and Servers

Log Domain is not stored in Postgres database, it is part of Solr indexer only

14. Which process is responsible for the generation of certificates?

cpm

cpca

dbsync

fwm

15. the difference in debugging a S2S or C2S (using Check Point VPN Client) VPN?

there is no difference

the C2S VPN uses a different VPN deamon and there a second VPN debug

the C2S VPN can not be debugged as it uses different protocols for the key exchange

the C2S client uses Browser based SSL vpn and cant be debugged

16. The two procedures available for debugging in the firewall kernel are

i fw ctl zdebug

ii fw ctl debug/kdebug

Choose the correct statement explaining the differences in the two

(i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line

(i) is used to debug the access control policy only, however (n) can be used to debug a unified policy

(i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.

(i) is used on a Security Gateway, whereas (11) is used on a Security Management Server

17. When a User Mode process suddenly crashes it may create a core dump file.

Which of the following information is available in the core dump and may be used to identify the root cause of the crash?

i Program Counter

ii Stack Pointer

ii. Memory management information

iv Other Processor and OS flags / information

i, ii, lii and iv

i and n only

iii and iv only

D Only iii

18. What is the buffer size set by the fw ctl zdebug command?

1 MB

1 GB

8MB

8GB

19. You have configured IPS Bypass Under Load function with additional kernel parameters ids_tolerance_no_stress=15 and ids_tolerance_stress-15 For configuration you used the *fw ctl set' command After reboot you noticed that these parameters returned to their default values.

What do you need to do to make this configuration work immediately and stay permanent?

Set these parameters again with “fw ctl set” and edit appropriate parameters in $FWDIR/boot/modules/ fwkern.conf

Use script $FWDIR/bin IpsSetBypass.sh to set these parameters

Set these parameters again with “fw ctl set” and save configuration with “save config”

Edit appropriate parameters in $FWDIR/boot/modules/fwkern.conf

20. What are some measures you can take to prevent IPS false positives?

Exclude problematic services from being protected by IPS (sip, H 323, etc )

Use IPS only in Detect mode

Use Recommended IPS profile

Capture packets. Update the IPS database, and Back up custom IPS files

Welcome To Choose Required IT Certification Exams Online

Passing Check Point CCTE Certification Exam Can Be Guaranteed With 156-585 Updated Questions

Check Point 156-585 Free Demo Questions Are Below to Help You Check The Quality

Author

Leave a Reply Cancel reply