Cisco CLCOR 350-801 Exam Questions For CCNP Collaboration and CCIE Collaboration Certifications

Regina2021-09-07T03:29:23+00:00

By Regina CCNP Collaboration, Cisco, Free Questions Online 350-801, 350-801 CLCOR, 350-801 exam questions, 350-801 free questions 0 Comments

When will you decide to take and pass 350-801 Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) exam? 350-801 Cisco CLCOR exam is not only the core exam for CCNP Collaboration certification, also the qualify exam of CCIE Collaboration certification. Cisco CLCOR 350-801 exam questions from ITExamShop are great and real, which must be your best study materials for Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) certification exam. Come to read Cisco 350-801 exam questions with the printable pdf file and simulated software version.

To check the demo questions of Cisco CLCOR 350-801 exam questions now, read 350-801 free questions below:

Page 1 of 6

1. When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?

Cisco Unified CM Group

Device Pool

SRST

Route Group

2. Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addressing mode be set up in the Cisco Unity Connection?

Set up media ports for each port group to use IPv4.

Set up for each group to use IPv4 and IPv6.

Set up IPv4 and IPv6 in cisco Unified C

Set up is not required.

3. An administrator must configure the local route group feature on cisco UCM.

Which step will enable this feature?

For each route list configure a route group to use as a Local Route Group.

For each route pattern, select the Local Route Group as the destination.

For each route group, check the box for the Local Route Group feature.

For each device pool. configure a route group to use as a Local Route Group for that device pool

4. A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.

Which IOS entry sets the required priority?

dtmf-relay cisco-rtp

sip-notify dtmf-relay rtp-nte

dtmf-relay rtp-nte sip-notify

dtmf-relay sip-kmpl cisco-rtp

5. Which Cisco Collaboration Edge architecture product allows remote endpoints to leverage corporate on-premises Cisco Unified Communications infrastructure?

Cisco Webex

Cisco VPN Client

Cisco Unified Communications Mobile and Remote Access

Cisco Umbrella

6. Refer to the Exhibit.

Which command is required to allow this media resource to handle Video Media streams?

maximum sessions hardware 50

video codec h264

codec pass-through

associate application Cisco Unified Border Element

7. How does an administrator make Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Configure a calling party transformation pattern that keeps only last 10 digits.

Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXX

On the inbound SIP trunk, change Significant Digits to 10.

Change the service parameter Apply Transformations On Remote Number to True.

8. Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP.

Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.

Add the audio forced command to voice service voip on the Unified Border Elements.

Check the Retry Call as Audio on the SIP trunk

Set Video bandwidth in the Region settings to 0.

Change the Video Capabilities dropdown on the endpoint to Disabled.

9. What is the function of the Cisco Unity Connection Call Handler?

routes calls to a user based on caller input

queues calls

searches a list of extensions until the call is answered

allows customized scripts for IVR capabilities

10. An engineer configures Cisco Unified Communications Manager to prevent toll fraud.

At which two point does the engineer block the pattern in Cisco Unified CM to complete this task? (Choose two.)

route pattern

translation pattern

route group

partition

CSS

Page 2 of 6

11. What dialed number match this cisco UCM route pattern?

1[23]XX

1200 through 1399 only

1230 through 1239 only

12300 through 12399 only

1200 through 1300 only

12. Which type of greeting in the Call Handler configuration in Cisco Unity Connection overtimes all other greetings?

holidays

supervisory

alternate

priority

13. A customer wants to deploy Cisco Jabber Phone Mode with contacts.

Which two configurations are needed to accomplish this goal? (Choose two)

Add the Application Client Users role to the Cisco UCM end users.

Remove the IM and Presence servers from the Cisco UCM service profile.

Disable Instant Messaging on IM and Presence.

Import Contacts.xml into Jabber.

Enable Cisco UCM end-users for IM and Presence.

14. Which call flow matches traffic from a Mobile and Remote Access registered endpoint to central call control?

Endpoint > Expressway-C > Cisco unified CM

Endpoint > Expressway-E > Cisco Unified CM

Endpoint > Expressway-C > Expressway-E > Cisco Unified CM

Endpoint > Expressway-E > Expressway-C > Cisco Unified CM

15. How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?

On-hook, by pressing the digits and entering “#” to process the call, Unified CM performs a digit-by-digit analysis; off-hook, Unified CM analyses all digits as a string.

On-hook, unified CM performs a digit-by-digit analysis; off-hook, Unified CM considers all digit were dialed and dos not wait for additional digits.

On-hook, no digit analysis is performed; off-hook, Unified CM requires the “#” to start the digit analysis.

On-hook, Unified CM considers all digits were dialed and does not wait for additional digits; off-hook, Unified CM performs a digit-by-digit analysis.

16. What dialled numbers match this Cisco UCM route pattern?

1[23]XX

1200 through 1300 only

1200 through 1399 only

12300 through 12399 only

1230 through 1239 only

17. Multiple route patterns match a number.

How does Cisco Unified Communications Manager determine which pattern to use?

the one that discards everything PreDot

the one with the longest match

the one that comes first in numerical order

the one with the closed match

18. Refer to the exhibit.

An administrator must fix the SRV records to ensure that server 1 .sample.com is always contacted first from the three servers.

Which solution should the engineer apply to resolve this issue?

Priority = 100. Weight = 90

Priority = 5. Weight = 70

Priority = 10, Weight = 5

Priority = 10. Weight =10

19. Which two conditions must a user meet to provision a new device using the self-provisioning feature? (Choose two.)

The user must have the appropriate universal device template linked to the linked to the user profile.

The user must have at least one user device profile assigned.

The user must have a primary extension.

At least DNs must be assigned to the user device.

The user must be part of “standard CCM Super User”.

20. An administrator is in the process of moving cisco unity connection mailboxes between mailbox stores the administrator notices that some mailboxes have active message waiting indicators what happens to these mailboxes when they are moved?

The move will fall If MWI status Is active.

Moving the mailboxes from one store to another falls If MWI Is turned on.

If source and target mailbox store are not disabled. MWI status is not retained.

The MWI status is retained after a mailbox is moved from one store to another.

Page 3 of 6

21. Which attribute contains an XMPP stanza?

message

type

presence

22. Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?

Upload the custom configuration in the TFTP server in cisco Unified C

Configure the Cisco Unified CM’s IP in voice service VoI

Apply the ccm-manager configuration commands to the gateway.

From Cisco Unified CM >Device > Gateway > Add gateway, check the auto-configuration check box.

23. Endpoint A is attempting to call endpoint B. Endpoint A only supports G.711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw.

Which two media are resources are allocated to normalize packetization rates through transrating?

Hardware MTP on Cisco IOS Software

Software MTP on Cisco Unified Communication Manager

Software MTP on Cisco IOS Software

Software transcoder on Cisco unified Communications manager

Hardware transcoder on Cisco IOS Software

24. An administrator with ID392116981 is receiving complaints of pixilation smearing, and pulsing of video calls between two offices that are connected by a WAN.

Assuming that QoS is implemented on the WAN connection, which classification is used to mark the video traffic, according to the Cisco QoS baseline?

AF31

CS3

AF41

25. DRAG DROP

According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.

26. Which command must be defined before an administrator changes the linecode value on an ISDN T1 PRI in slot 0/2 on an IOS-XE gateway?

isdn incoming-voice voice

pri-group timeslots 1-24

card type t1 0 2

voice-port 0/2/0:23

27. Refer to the exhibit.

A call is failing to establish between two SIP Devices. The Called device answer with this SDP.

Which SDP parameter causes this issue?

The RTP port is set to 0.

The payload for

711ulaw must be 18.

The media stream is set to sendonly.

The calling device did not offer a ptime value.

28. An engineer is configuring a BOT device for a Jabber user in Cisco Unified Communication Manager.

Which phone type must be selected?

Cisco Dual Mode for iPhone

Cisco Dual Mode for Android

third-party SIP device

Cisco Unified Client Services Framework

29. You are adding regions in Cisco Unified Communications Manager.

Which codec(s) are selected when a call is placed if you set up the max audio bit rate to use 8 kbps?

722

729

729 and

711ualw

711ulaw and

711alaw

30. Due to provider requirements, outgoing calls from the Enterprise to the PSTN must start with channel 1.

Which ISDN command changes the channel selection on IOS to meet this requirement?

isdn bchan-number-order ascending

isdn protocol-emulate network

isdn incoming-voice

isdn bchan-number-order decending

Page 4 of 6

31. Refer to the exhibit.

Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt.

Why is this happening and how is it fixed?

Cisco Unified Border Element is not sending any support for DTM

DTMF configuration must be added to the appropriate dial peer.

The Cisco Unity Connection Call Handler is configured for a -Release to Switch" transfer type. Transfers must be disabled for the Cisco Unity Connection Call Handler.

Cisco Unity Connection is configured on

729 only. Cisco Unity Connection must be reconfigured to support iLB

Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SD

32. Refer to the exhibit.

What is the result of applying these two rules to a voice translation-profile for use with an ISDT1 PRI on a Cisco Voice gateway?

The ISDN Type is modified to the administrators defined value.

The ISDN Plan is modified to the administrators defined value.

The leading Plus is stripped from the numeric phone number.

Any Zero is stripped from the numeric phone number.

33. Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan.

How long is the default wait time?

5 seconds

10 seconds

15 seconds

20 seconds

34. An engineer troubleshoots a Cisco Jabber login problem on a Windows PC in the corporate network. The login fails with the error message "Cannot find your services automatically. Click advanced settings to set up manually.’’.

Which action should the engineer take first?

Verify the username and password and try again

Verify whether the cup-xmpp certificates are valid.

Perform a manual DNS lookup of SRV record _collab-edge._tls.domain.com.

Perform a manual DNS lookup of SRV record _cisco-uds.tcp.domain.com.

35. An engineer must configure a cisco ISR 4000 as an MGCP gateway to download its MGCP-specific configuration from cisco UCM.

Which Cisco IOS configuration snippet accomplishes this task?

Option A

Option B

Option C

Option D

36. Refer to the exhibit.

An engineer is confining class of control for a user in Cisco UCM.

Which change will ensure that the user is unable to call 2143?

Change line partition to Partition_A

Change line CSS to only contain Partition_B

Set the user's line CSS to <None>

Set the users device CSS to <None>

37. On which protocol and port combination does Cisco prime collaboration receive notifications (Traps and Inform Requests) from several network devices in the collaboration infrastructure for which it has requested notifications?

UDP 161

TCP 161

TCP 80

UDP 162

38. Refer to the exhibit.

In this cisco UCM setup configured for EARLY offer, what is the codec preference line in the initial SIP INVITE SDP?

m=audio 16444 RTP/AVP 9 18 101

m=audio 16444 RTP/AVP 0 8 18 101

m=audio 16444 RTP/AVP 18 101

m=audio 16444 RTP/AVP 9 0 8 18 101

39. Refer to the exhibit.

An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful.

What is the cause of this issue and how should it be resolved?

The certificates on the SIP phone are not trusted by the Cisco UC

The SIP phone must generate new certificates.

DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.

An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UC

The SIP phone and Cisco UCM must be set with identical NTP sources.

An network device is blocking TCP port 5060 from the SIP phone to the Cisco UC

This device must be reconfigured to allow traffic from the IP phone.

40. What is required when deploying co-resident VMs by using Cisco UCM?

Provide a guaranteed bandwidth of 10 Mbps.

Ensure that applications will perform Qo

Avoid hardware oversubscription.

Deploy the VMs to a server running Cisco UC

Page 5 of 6

41. Refer to the exhibit.

An engineer verifies the configured of an MGCP gateway. The commands are already configured.

Which command is necessary to enable MGCP?

Device(config)# mgcp enable

Device(config)# ccm-manager enable

Device (config) # com-manager active

Device (config)# mgcp

42. After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16.

Which issue can the Cisco Unified CM cluster experience?

The date/time group an all phones default to the time zone of the engineer.

The cluster loses access to port 124 at the firewall.

Unified CM sends an NTPv4 packet.

Database replication is not synchronized on the Unified CM nodes.

43. Where is the default for maximum session Bit Rate for a region configured?

Region configuration

Enterprise Phone configuration

Service parameter configuration

Enterprise parameters configuration

44. what causes poor voice quality and video pixelization in a video call?

Cisco Unified Communications Manager is configured to use

711 instead

729.

1 Gbps network ports are used instead of 100 Mbps network ports.

The QoS is configured incorrectly.

A firewall is blocking the RTP ports.

45. What makes Cisco Unified Border Element a better choice than a conventional Session border controller?

Voice policy

SIP security

DTMF interworking

Address hiding

46. How can an administrator stop Cisco Unified Communications Manager from advertising the OPUS codec for recording enabled devices?

In CUCM Service Parameters set “Opus codec Enables” to “Enabled for all devices Except Recording-Enabled devices.

Go to the phone’s configuration page and set “Advertise OPUS Codec” to be “false”

Router recorded calls through Cisco Unified Border Element because it does not support OPU

Integrate the Cisco Unified CM with a recording solution that does not support OPU

47. Which two features of Cisco Prime Collaboration Assurance require advanced licensing? (Choose two.)

real time alarm browse

multicluster support

call quality monitoring

email notifications

customizable events

48. What is required for Cisco UCM to accept SIP calls with a URI in the format of “sip [email protected]”?

Define Cluster Fully Qualified Domain Name under Servers in Cisco UC

Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.

Set the SIPS URI Handling to True in CallManager Service Parameters.

Define Cluster Fully Qualified Domain Name in Enterprise Parameters.

49. An engineer with troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter.

Which two areas does the engineer check to prevent jitter? (Choose two.)

Voice packets are classified and marked.

All devices use wired connections instead of wireless connections.

The network meets bandwidth requirements.

Cisco UBE manages voice traffic, not data traffic.

MTP is enable on the sip trunk to cisco Unified Border Element.

50. Refer to the exhibit.

Which Codec is negotiated?

729

ILBC

711ulaw

728

Page 6 of 6

51. Refer to the exhibit.

A customer submits this output, captured on a Cisco IOS router.

Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?

interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn incoming-voice voice isdn send-alerting isdn static-tei 0

interface BRI0/1/0 no ip address isdn switch-type basic-net3 isdn point-to-multipoint-setup isdn incoming-voice voice isdn send-alerting isdn static-tei 0

interface BRI0/1/1 no Ip address isdn switch-type basic-net3 isdn point-to-point-setup isdn incoming-voice voice isdn send-alerting isdn static-tei 0

interface BRI0/1/1 no ip address isdn switch-type basic-net3 isdn point-to-multipoint-setup isdn incoming-voice voice isdn send-alerting isdn static-tei 0

52. A network administrator with ID392116981 has determined that a WAN link between two Cisco UCM clusters supports only 1 Mbps of bandwidth for voice traffic.

How many calls does this link support if G.711 as the audio codec is used?

53. How is bandwidth allocated to traffic flows in a flow-based WFQ solution?

Each type of traffic flow has equal bandwidth.

Bandwidth is divided among traffic flows. Voice has priority.

Voice has priority and the other types of traffic share the remaining bandwidth

All the bandwidth is divided based on the QoS marking of the packets.

54. Which two DNS records must be created to configure Service Discovery for on-premises Jabber? (Choose two.)

_cuplogin._tcp.cisco.com pointing to a record of IM&P

_cisco-uds._tcp.cisco.com pointing to a record of Cisco Unified CM

_cuplogin._tls.cisco.com pointing to the IP address of IM&P

_cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications manager

_xmpp._tls.cisco.com pointing to a record of IM&P

55. When a phone is registered over Mobile and Remote Access, where does it register?

Expressway-C

Cisco Unified Communications Manager

Cisco Unified presence server

Expressway-E

56. Which wildcard must an engineer configure to match a whole domain in SIP route patterns?

57. An engineer must configure a route pattern that can route all + E.164 globalized international numbers for the dial plans of all countries.

Which cisco UCM configuration accomplishes this task?

Option A

Option B

Option C

Option D

58. A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronize User in Cisco Unified Communications Manager.

Which step is next to remove this user from Cisco Unified Communications Manager?

Restart the Dirsync service after the user is deleted from LDAP directory.

Delete the user directly from Cisco Unified Communications Manager.

Wait 24 hours for the garbage collector to remove the user.

Execute a manual sync to refresh the local databased and delete the end user.

59. An engineer is designing a load balancing solution for two Cisco Unified Border routers. The first router (cube1.abc.com) takes 60% of the calls and the second router (cute2.abc.com) takes 40% of the calls, Assume all DNS A records have been created.

Which two SRV records are needed for a load balanced solution? (Choose two.)

sip_udp.abc.com 60 IN SRV 1 40 5060 cube2.abc.com

sip_udp.abc.com 60 IN SRV 3 60 5060 cube2.abc.com

sip_udp.abc.com 60 IN SRV 60 1 5060 cube1.abc.com

sip_udp.abc.com 60 IN SRV 2 60 5060 cube1.abc.com

sip_udp.abc.com 60 IN SRV 1 60 5060 cube1.abc.com

60. Which issue can occur if QoS is not Deployed on a Cisco Collaboration architecture across the WAN?

Unexpected shut-down on Cisco Unified Communications Manager

Packet fragmentation

403 Forbidden errors on SIP calls

Excessive jitter

Welcome To Choose Required IT Certification Exams Online

Cisco CLCOR 350-801 Exam Questions For CCNP Collaboration and CCIE Collaboration Certifications

To check the demo questions of Cisco CLCOR 350-801 exam questions now, read 350-801 free questions below:

Author

Leave a Reply Cancel reply